.. _lima-tango-basler: Basler Tango device ===================== This is the reference documentation of the Basler Tango device. you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the :ref:`Basler camera plugin ` section. Properties ---------- ======================== =============== ================================= ===================================== Property name Mandatory Default value Description ======================== =============== ================================= ===================================== camera_id No uname://** The camera ID (see details below) packet_size No 8000 the packet size inter_packet_delay No 0 The inter packet delay frame_transmission_delay No 0 The frame transmission delay ======================== =============== ================================= ===================================== *camera_id* property identifies the camera in the network. Several types of ID might be given: * IP/hostname (examples: `ip://192.168.5.2`, `ip://white_beam_viewer1.esrf.fr`) * Basler serial number (example: `sn://12345678`) * Basler user name (example: `uname://white_beam_viewer1`) If no *camera_id* is given, it uses the server instance name as the camera user name (example, if your server is called `LimaCCDs/white_beam_viewer1`, the default value for *camera_id* will be `uname://white_beam_viewer1`). To maintain backward compatibility, the old *cam_ip_address* is still supported but is considered deprecated and might disappear in the future. Both inter_packet_delay and frame_tranmission_delay properties can be used to tune the GiGE performance, for more information on how to configure a GiGE Basler camera please refer to the Basler documentation. Attributes ---------- This camera device has not attribute. Commands -------- ======================= =============== ======================= =========================================== Command name Arg. in Arg. out Description ======================= =============== ======================= =========================================== Init DevVoid DevVoid Do not use State DevVoid DevLong Return the device state Status DevVoid DevString Return the device state as a string getAttrStringValueList DevString: DevVarStringArray: Return the authorized string value list for Attribute name String value list a given attribute name ======================= =============== ======================= ===========================================