Pilatus Tango device
This is the reference documentation of the Pilatus Tango device.
you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the Pilatus camera plugin section.
Properties
This camera device has no property.
Property name |
Mandatory |
Default value |
Description |
---|---|---|---|
host_name |
No |
localhost |
Pilatus computer hostname |
host_port |
No |
41234 |
Pilatus camserver port number |
config_file |
No |
/home/det/ p2_det/config/ cam_data/ camera.def |
Configuration file path, read to get pilatus version (2 or 3) and the camera size (height and width) |
tmpfs_path |
No |
/lima_data |
Path to the temporary file-system where camserver will store the images |
Attributes
Attribute name |
RW |
Type |
Description |
---|---|---|---|
threshold_gain |
rw |
DevString |
The detector threshold gain (LOW,MID,HIGH,ULTRA HIGH,AUTO) |
fill_mode |
rw |
DevString |
The gap fill mode (ON,OFF) |
threshold |
rw |
DevLong |
The threshold level of detector in eV |
energy_threshold |
rw |
DevFloat |
The energy threshold in keV (set the gain and the threshold) |
trigger_delay |
rw |
DevDouble |
The start exposure delay after the hard trigger |
nb_exposure_per_frame |
rw |
DevLong |
The number of exposure/frame to set an accumulation of frames |
temperature_humidity |
ro |
DevFloat array |
List of both constants, a detector can have multiple sensors |
sensor_channels |
ro |
DevShort array |
List of sens channels (refer to Dectris documentation) |
Commands
Command name |
Arg. in |
Arg. out |
Description |
---|---|---|---|
Init |
DevVoid |
DevVoid |
Do not use |
State |
DevVoid |
DevLong |
Return the device state |
Status |
DevVoid |
DevString |
Return the device state as a string |
getAttrStringValueList |
DevString: Attribute name |
DevVarStringArray: String value list |
Return the authorized string value list for a given attribute name |