Pixirad Tango device ==================== This is the reference documentation of the Pixirad Tango device. you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the :ref:`Pixirad camera plugin ` section. Properties ---------- ==================== =============== =============== ========================================================================= Property name Mandatory Default value Description ==================== =============== =============== ========================================================================= ip_address Yes N/A The ip address or the hostname of the detector computer interface port_number No 6666 The port number for detector (DAQ commmands) initial_model No PX8 Model type PX1, PX2 or PX8 ==================== =============== =============== ========================================================================= Attributes ---------- ============================= ======= ======================= ========================================================================== Attribute name RW Type Description ============================= ======= ======================= ========================================================================== high_threshold0 rw DevDouble High Energy threshold 0 (KeV) low_threshold0 rw DevDouble Low Energy threshold 0 (KeV) high_threshold1 rw DevDouble High Energy threshold 1 (KeV) low_threshold1 rw DevDouble Low Energy threshold 1 (KeV) dead_time_free_mode rw DevString Enable or disable the free mode dead-time: - **DEAD_TIME_FREE_MODE_OFF** - **DEAD_TIME_FREE_MODE_ON** cooling_temperature_setpoint rw DevDouble Cooling temperature setpoint for the peltier module of the detector high_voltage_biais rw DevDouble Bias tension for the high voltage in manual mode high_voltage_delay_before_on rw DevDouble Delay for the hv before acquisition h_v_refresh_period rw DevShort How many image before hv is reset delay_between_frames rw DevShort Delay between frame in loop acquisition (millisecond) color_mode rw DevString Color mode: - **COLMODE_1COL0** - **COLMODE_2COL** - **COLMODE_1COL1** - **COLMODE_DTF** - **COLMODE_4COL** sensor_config_build rw DevString The configuration build: - **PX1** - **PX2** - **PX8** trsf_mode rw DevString Moderated or unmoderated udp transport, modes are: - **UMOD** - **UNMODH** - **MOD** h_v_bias_mode_power rw DevBoolean Enable (True) or disable (False) the high voltage hybrid_mode rw DevString **CDTE** or **GAAS** temperature_peltier_cold rw DevDouble Temperature of the peltier (live) cold surface in Celsuis temperature_peltier_hot rw DevDouble Temperature of the peltier (live) Hot surface in Celsuis high_voltage_tension rw DevDouble The tension of the High Voltage in Volt box_humidity ro DevDouble The moisture level in the detector box box_temperature ro DevDouble The temperature in the detector box in Celsuis peltier_power ro DevDouble The percentage of peltier power alarm_temp_too_hot ro DevBoolean The temperature is too hot alarm alarm_temp_too_hot_enabled ro DevBoolean The Alarm <> is enabled or not (is watched or not) alarm_temp_too_cold ro DevBoolean The temperature is too cold alarm alarm_temp_too_cold_enabled ro DevBoolean The Alarm <> is enabled or not (is watched or not) alarm_humidity ro DevBoolean The humidity is too high alarm_humidity_enabled ro DevBoolean The Alarm <> is enabled or not (is watched or not) ============================= ======= ======================= ========================================================================== Please refer to the Pixirad documention for more information on parameter meanings. Commands -------- ======================= =============== ======================= =========================================== Command name Arg. in Arg. out Description ======================= =============== ======================= =========================================== Init DevVoid DevVoid Do not use State DevVoid DevLong Return the device state Status DevVoid DevString Return the device state as a string getAttrStringValueList DevString: DevVarStringArray: Return the authorized string value list for Attribute name String value list a given attribute name ======================= =============== ======================= ===========================================