Maxipix Tango device

This is the reference documentation of the Maxipix Tango device.

you can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the Maxipix camera plugin section.

Properties

Property name Mandatory Default value Description
config_name Yes N/A The configuration name
config_path Yes N/A The configuration directory path where the files are available
espia_dev_nb No 0 The acquisition Espia board number
reconstruction_active No True Activate the reconstruction or not
fill_mode No Raw
the chip-gap filling mode, Raw, Zero,
Dispatch or Mean.
gate_level No High_Rise The Input gate level, High_rise or Low_Fall
gate_mode No Inactive The gate mode, Inactive or Active
ready_level No High_Rise The output ready level, High_rise or Low_Fall
ready_mode No Exposure The output Ready mode, Exposure or Exposure_Readout
shutter_level No High_Rise The output Shutter level, High_rise or Low_Fall
trigger_level No High_Rise The output Trigger level, High_rise or Low_Fall

Attributes

Attribute name RW Type Description
config_name rw DevString the configuration name. If changed the detector is reconfigured and reset.
config_path rw DevString the configuration directory path where the files are available
energy_calibration rw Spectrum DevDouble The energy calibration, [0] = threshold setpoint , [1] threshold step-size (keV)
energy_threshold rw DevDouble The threshold in energy (keV)
threshold rw DevDouble The detector threshold
threshold_noise rw Spectrum DevDouble The threshold noise of each chip, [0] =chip0 thl, [0] = chip1 thl, ....
espia_dev_nb rw DevString The Espia board number.
fill_mode rw DevString
The chip-gap filling mode:
  • Raw, the border pixel values are copied
  • Zero, border and gap pixel are set to zero
  • Dispatch, the border pixel values are interpolated over the full gap
  • Mean, the gap pixels are filled with the border pixels average value.
gate_level rw DevString
The Input gate level:
  • High_rise
  • Low_Fall
gate_mode rw DevString
The gate mode:
  • Inactive
  • Active
ready_mode rw DevString
The output Ready mode:
  • Exposure
  • Exposure_Readout
shutter_level rw DevString
The output Shutter level
  • High_rise
  • Low_Fall
trigger_level rw DevString
The output Trigger level:
  • High_rise
  • Low_Fall
dac_possible ro DevString[] Return the list of the the possible dac names
dac_name rw DevString The dac name to be write/read (dac_value)
dac_value rw DevLong The dac value of the given dac_name dac register

Warning: we recommend to not change the DAC register values (dac_name and dac_value attributes) excepted if you well know what you are doing, if you have some troubles with the detector please contact the ESRF Detector Unit first.

Commands

Command name Arg. in Arg. out Description
Init DevVoid DevVoid Do not use
State DevVoid DevLong Return the device state
Status DevVoid DevString Return the device state as a string
getAttrStringValueList DevString: Attribute name DevVarStringArray: String value list Return the authorized string value list for a given attribute name

Table Of Contents

Previous topic

ImXPAD Tango device

Next topic

Merlin Tango device

This Page